Break into Your Industry

3 Tips For Buying A Good Used Forklift Battery

Posted by on 11:27 am in Uncategorized | Comments Off on 3 Tips For Buying A Good Used Forklift Battery

If you are looking for a new forklift battery for your forklift, you might have noticed that brand new ones can be costly. Even though it might be worth it, you might still be looking for ways to save money. It is possible to buy a used forklift battery, but there are a few things that you will want to look at when buying. These are a few tips that you can follow to help ensure that you get a good used forklift battery for your electric forklift. 1. Look for Crystallization First of all, you will want to inspect the battery to look for crystallization. If you see crystallization, which will often be in either green or white, near the battery poles, you may want to pass on that particular battery. This is because this crystallization can be a sign of sulphurization and could indicate that the battery is old and does not have much “life” left in it. 2. Ask About a Warranty Did you know that some dealers actually offer a short-term warranty on used batteries? It never hurts to ask, and even if you have to pay for it, you might find it to be worth it. Then, if the battery turns out to be a “lemon” when you put it in your forklift or if it wears out before you have gotten your money’s worth out of it, you may be able to have it repaired or replaced. 3. Ask if the Battery Was Refurbished Some dealers actually send their used forklift batteries in to the manufacturer to have them refurbished. Others have the equipment and know-how to refurbish a battery themselves. If a battery has been cleaned and refurbished by a professional, it can be pretty close to being as good as a brand new battery, but it can still be much more affordable. If you have the choice between buying a refurbished used battery or a used battery that has not been refurbished, it is almost always a better idea to go with the battery that has been refurbished, even if the price is a little higher. As you can see, you do not have to go in without any knowledge when buying a used forklift battery. If you inspect the battery for signs of wear and tear and if you ask the right questions, you can help improve your chances of finding the right battery for the right price. For more information, contact companies like U.S. Lift & Warehouse Equipment...

read more

Why An Energy Audit May Be The Best Electrical Project For Your Factory

Posted by on 9:04 am in Uncategorized | Comments Off on Why An Energy Audit May Be The Best Electrical Project For Your Factory

If you run a factory and have been dealing with high electrical bills, you may want to have an energy audit done on your place. Don’t assume that the high cost of the bills is due solely to the large equipment you’re using. Much of that electricity could be going out in the form of wasted energy or as fuel for your facility’s air conditioner as it combats inefficient insulation and heat-generating machinery. By having the audit done, you could be able to improve your building’s electrical usage by a large amount. Saves Money, of Course First and foremost, an energy audit of your facility will show you how much energy is being wasted through leaky doors, windows, and walls. You’ll see where cool air is escaping to the outside and where running machinery is creating extra heat. Once you have this information, you can take steps to seal the place up better and stop temperature transfers, for example. Better weatherstripping and better insulation can help reduce the amount of energy used to keep the building’s internal temperature more even, which means your utility bills should go down. Stops Energy-Use Loop If the equipment in your factory is giving off more heat, your HVAC system is going to have to work more and more to make up for the heat that’s being generated inside — if it doesn’t, then the internal temperature can rise to uncomfortable levels. An energy audit can show you which pieces of equipment are the worst offenders, allowing you to isolate those pieces if possible or replace them with models that regulate heat better. The resulting drop in room temperature will help your utility bills stay low. Identifies Areas in Need of Upgrades As the energy audit person looks over your facility, he or she will be able to identify areas that need to be upgraded, be it getting better insulation or upgrading wiring so that you can provide more power to new, efficient equipment. The auditor can find outlets that haven’t been working correctly and show you where you might want to switch out old bulbs for newer LEDs. To arrange an energy audit that also looks at wiring, contact electrical contracting companies like Albarell Electric Inc in the region. Many can complete an audit and give you valuable information about the electrical and energy usage in your factory, as well as helping you figure out ways to mitigate energy...

read more

Welding 101: 5 Things You Need To Know To Get Started

Posted by on 4:31 am in Uncategorized | Comments Off on Welding 101: 5 Things You Need To Know To Get Started

Welding is an exciting career option, but there are a few things anyone considering it should know before they get started. What do you need? What kind of safety equipment is necessary? How do you match up the right metals? With so many questions to answer, it might seem overwhelming, but here are five things you need to know to get started.  Your Safety Is Vital The first thing to remember is that your safety is key to your success in this industry. What kinds of safety equipment should you use? Gloves that can withstand hot metal and fire A welding mask to protect your face and eyes A jacket or apron to protect your body Steel-toe or heat-resistant boots or shoes Jeans or heavy clothing for your legs Using this equipment is important, because hot metals and fires can quickly burn you, blind you, or cause other health problems.  Wire Welding Is Quick to Learn With Since you’re just learning the ropes, wire welding is a good place to start. There are two types: MIG and flux-cored. MIG stands for metal inert gas, and it relies on shielding gases to protect the weld. With flux-core, the wire is designed to be used with or without a shielding gas. What’s the difference? Flux-core is better for use outside, since it doesn’t need as much protection.  A third kind of welding that is easy to get started with is stick welding; like wire welding, it can be used inside or out. Using a stick process is quick and best for fast repairs.  You Choose Your Input Voltage The voltage of your machinery matters. On every device, you usually have a choice between 110v or 230v. The lower voltage is good for thin metals, while the higher voltage allows you to melt thicker metals efficiently.  There Are Many Tools: Choose a Good User Interface With a variety of tools available like roll-out wheels, stick welding machines, and even remote-controlled welding machines, it’s important to find a machine you’re comfortable with. To start with, finding one that knows which voltage you’re using is great, because it takes some guesswork out of the weld. Later, you can upgrade to a machine that allows you to dial in the specs you want for the project.  Understand Your Consumables Arguably one of the most important parts of a weld is the consumable you’re using. A consumable is simply the metal you’re using to weld your pieces together. It’s important to match this metal to the right heat and the right welding process. For instance, aluminum works great with a spool gun, which feeds it out for you, and melts at lower temperatures. It can be used for quick fixes. Whatever you do, make sure the consumable you have works with the machines you choose. Finding a machine that takes a variety of consumables will help make sure you can weld a variety of pieces.  These are just a few tips to help you get started. Give it a try, and you’ll enjoy this new career path. For more information, contact companies like...

read more

Reduce The Risk Of Arson To Your Dumpster With These Tactics

Posted by on 5:33 am in Uncategorized | Comments Off on Reduce The Risk Of Arson To Your Dumpster With These Tactics

A roll off dumpster rental delivered to your home will make your life easier regardless of the project that you need it for, but you’ll be in for a major hassle — not to mention a risk to the safety of your home — if someone targets the dumpster’s contents for arson overnight by simply tossing a lit pack of matches inside. While the risk of arson in your community might seem low, it’s important to take a number of steps to decrease your chance of having your dumpster targeted by mischievous teens who are out after dark with bad intentions. Here are some tactics that you can employ to dramatically reduce the risk of arson. Carefully Consider The Dumpster’s Location The location in which the dumpster is dropped off by the rental company can hugely reduce its likelihood of being targeted for arson. While you’ll be partially limited by where on your property the delivery truck can reach, there are some things to consider. If you have a long driveway, think about having the dumpster placed where it can’t be seen from the road; this should prevent passing teenagers from being tempted to cause arson. If your yard is such that a truck can pass through the side yard to the rear of your home, placing the dumpster in the backyard can be ideal, too. Use Lights At Night It’s important to keep the dumpster in a well-lit area overnight. This can mean leaving your home’s exterior lights turned on if the dumpster is close to your home, or even setting up a motion-activated light that will illuminate upon detecting movement around the dumpster. This type of light is ideal because any prowler will be visible upon the light turning on, which could send anyone running away from the dumpster because you could make it to the window of your home to spot the trespasser and call the authorities. Keep The Lid Secured Make sure that you always keep the lid down and locked on your dumpster. This will prevent the simple act of tossing something lit into the bin and the flames quickly spreading throughout your discarded waste. Dumpster lids can typically be secured with a chain and lock. When you rent the dumpster, make sure to specify that you want a receptacle with a lid so that you can keep the contents secure overnight — and don’t forget to visit your local hardware store to buy a padlock or combination lock to secure the chain....

read more

Tips To Assist With Counting Your Hardware Store’s Inventory

Posted by on 11:22 am in Uncategorized | Comments Off on Tips To Assist With Counting Your Hardware Store’s Inventory

If you are dreading the task of counting your hardware store’s inventory in the near future due to the amount of parts that you keep in stock, the following tips will assist with organization and accuracy and may even save you and your employees some time.  Weigh Parts On A Counting Scale If you do not already own one, purchase a heavy duty counting scale. A counting scale is designed to count large quantities. If you know the weight of a specific part, enter it on the keyboard that is installed on the front or side of the scale. Otherwise, place a single item on the scale to come up with an accurate weight. Next, place the part back in the container with the remaining pieces that are the same. Set the container with all of the pieces on the scale. Based upon the total weight, you can determine how many parts are inside of the container by dividing the total weight by the weight of a single piece.  Use Bulk Bins To Transport Parts Purchase bulk bins with wheels to assist with transporting heavy parts to the counting scale and back. You can purchase bulk bins from a company like Garland’s, Inc. If you have several employees working for you, have them all pitch in by being responsible for one of the carts and transporting items to and from a specific aisle in the store. By working together and utilizing several carts at the same time, completing the inventory project may not take as long as it did in the past. Once inventory responsibilities are complete, the carts can be used during hours that your store is open to transport items that were shipped to you from vendors to the appropriate aisles in the building. They could also be used to move items that were purchased by customers to their vehicles in the parking lot. Double Check The Entry Of Calculations After items are counted, enter them into a database on your computer so that you have a permanent record that you can pull up whenever it is needed. Have one employee enter each number and assign another employee to check behind them when they have finished to double check that the numbers have been entered correctly. By taking the extra time to check the numbers, it won’t be likely that a mistake was made, and you and your staff will not need to recount items inside of your store.  If you and your employees use the tips and find that they are helpful, use them each time counting inventory is...

read more

Tips For Preparing Your Patio Site For A Ready-Mix Cement Delivery

Posted by on 6:03 am in Uncategorized | Comments Off on Tips For Preparing Your Patio Site For A Ready-Mix Cement Delivery

If you have decided to order a ready-mix cement delivery to make the process of installing your custom concrete slab patio easier, then you need to take certain steps to prepare for the cement’s delivery. By taking extra care when you set up your site prior to the cement’s delivery, you can ensure that your installation will go off without a hitch and your new patio will be solid and last for decades to come. Follow these tips to prepare your patio’s building site for a ready-mix cement delivery: Contact Your Concrete Supplier as Early as Possible While receiving a cement delivery is a new experience for you, concrete suppliers are very experienced in all aspects of the process. By contacting a supplier early in your building process, they will work with you and help you avoid many of the common pitfalls involved in receiving a load of cement. Build Your Forms and Rebar Structures Early Since your patio will require both cement forms and a rebar structure, you should build and install them at least a couple days before you plan to take delivery of your cement. The extra lead time allows you to more effectively deal with any small problems that may arise, such as a shortage of wood or rebar on your building site.  Select an Optimal Weather Day if Possible In order for cement to cure into concrete, it needs to stay moist and warm during the process. If you try to install your new patio in weather that is too cold, too hot, too wet, or too windy, then the cement will not properly cure. Aim for having your ready-mix load delivered on a mild day with little or no wind if at all possible. This will ensure that your concrete slab cures up as it is designed to. Wet the Sand Base Before Delivery Just before the cement mixer is expected to arrive at your house, wet down the base of sand inside of your cement forms. Do not flood the sand or water it enough to form puddles, just dampen it a bit to help it adhere to the cement mixture. Remove Any Tripping Hazards from the Site Finally, since everyone will be working swiftly to get the cement into your patio’s forms before it starts to dry out, it is important that you walk around your backyard and remove any unnecessary items that are tripping hazards or could cause injuries to the workers. For concrete, contact a company such as Hi-Grade Materials...

read more

Helpful Tips For Preventing Sifting Screens From Rusting

Posted by on 5:50 am in Uncategorized | Comments Off on Helpful Tips For Preventing Sifting Screens From Rusting

Your sifting screens do a big — and important — job in your factory. Keeping them in good condition is a must, and that includes preventing rust. Rusty sifting screens can create a lot of problems, since they can begin to deteriorate. This can cause holes in the screens, which can allow items that aren’t supposed to pass through to go through the holes. Plus, the rust could come off of the screen and get mixed into your products, which can affect the quality of the products that you sell to your customers. Luckily, there are a few steps that you can follow to help prevent them from rusting. Choose a Higher-Grade Screen First of all, sifting screens often aren’t very expensive. This means that it’s worth it to go ahead and buy a more expensive, higher-grade screen, since the price should still be reasonable. Higher-grade screens are often better-made and thicker, which can make them better able to withstand tough factory conditions. Not only can this help prevent them from deteriorating from rust, but it can also help ensure that they don’t bend or tear from constant weight during a shift. Apply a Protective Coating Before installing your screens, make sure that they have been coated with a clear coating to help protect them from rust and corrosion. Some screens are sold this way, so you might not have to do anything extra — just check with the manufacturer if you are unsure. If your screens have not been coated, use a spray-on clear protective coating for metal, which you can purchase from a hardware store or home improvement store. Clean and Dry Screens Each Day Even though you might ask your employees to wipe down your machinery and other equipment after the end of a busy shift, you might not think about the screens. However, removing the screens and clearing them of debris is important. It can help prevent clogs, and it can also help prevent rust. Cleaning them quickly with a cleaning solution, rinsing them off and then drying them carefully with a soft towel will help prevent caked-on debris and excessive moisture from causing rust, which can make your screens last longer. As you can see, there are steps that you can take to help prevent sifting screens from rusting. Follow these simple tips, and you should not have to worry about rust or corrosion appearing on your sifting screens any time...

read more

3 Reasons To Choose Stainless Steel Handrails For Your Factory Stairs

Posted by on 6:34 pm in Uncategorized | Comments Off on 3 Reasons To Choose Stainless Steel Handrails For Your Factory Stairs

When it comes to installing stairways, you have a lot of materials available to select from. Picking the right material for your factory’s handrails can help you reduce maintenance costs and improve safety. Steel makes an excellent choice for handrails in factory settings. Here are three reasons why you should consider steel railings for your own factory’s stairways as you remodel in the future. 1. Steel railings are durable. If you are looking to build handrails that will stand the test of time, steel is your best option. Steel has the ability to withstand tremendous amounts of pressure due to its high tensile strength. This means that your steel handrails will be able to get bumped without losing their form or functionality. Using building materials with a high tensile strength allows you to rest easy knowing that your factory remodel will be able to stand up to the industrial activities that occur within your factory each day. Investing in steel railings is the easiest way to ensure that your handrails will be usable well into the future. 2. Steel railings are resistant to corrosion. The structural integrity of your handrails is important when it comes to maintaining worker safety. If your factory uses chemicals during manufacturing processes, these chemicals could cause some building materials to corrode over time. Stainless steel is created when steel that contains a minimum of 10.5% chromium is exposed to an oxidizing environment. A thin film spontaneously forms over the surface of the steel, creating a corrosive-resistant barrier that will protect your railings from rust or other forms of damage. Maintaining structural integrity by eliminating corrosion ensures that you will not have to replace damaged handrails in the near future. 3. Steel railings are aesthetically pleasing. Even though your factory is an industrial environment, your workers can benefits from the inclusion of aesthetically pleasing design elements. The clean lines and sleek styling that characterize stainless steel make it perfect for inclusion in your design plan as railing materials for your factory stairways. Not only will stainless steel railings provide your workers with added beauty in their work environment, but they will help create a more modern workspace as well. Choosing building materials for a factory remodel can be a challenge. Opting for stainless steel when it comes to installing handrails can be beneficial. Steel railings give you durability, structural integrity, and aesthetic beauty, making them the perfect choice for any factory remodel you may undertake in the future. Contact a railing company, like Ballard Sheet Metal Works Inc or a similar location, for more information and...

read more

Demolition Tips For DIY-ers

Posted by on 2:36 pm in Uncategorized | Comments Off on Demolition Tips For DIY-ers

Pretty much any type of home renovation project that you begin will requires some demolition. You might be looking forward to busting through walls or breaking up tile. In fact, you might think that demolition work will be the easiest part of your project. However, if demo work isn’t completed correctly, it can be dangerous, expensive, and aggravating. So, before you begin tearing apart your house, check out these important demo tips. Make Safety Your Top Priority When you complete demolition work, safety needs to be your top priority. There are several dangerous factors out into play when you begin demolishing a room — heavy objects could fall on top of you, you could electrocute yourself, or you could cut yourself on a nail or broken glass. So, the first thing you should always do when entering an area that’s under construction is don your safety gear. Make sure you’re wearing goggles, gloves, a hard hat, and thick-soled boots at all times for added protection. Additionally, you need to turn off the power to the room before you start working. If you need to have a light in the room or use power tools, run an extension cord into the room that you’re working in from another room in your house. Know What’s Behind the Wall Before You Swing With the power to the room turned off, you won’t hit a live wire when you break down a wall, but that doesn’t mean that you can’t damage the wiring or plumbing by breaking down the wall in random places. You need to know what is behind the wall that you’re tearing down before you start demolishing it. to determine what’s behind the wall, you need to cut a small hole in the drywall. Then, shine a flashlight into the hole so that you can see what’s directly behind the wall that you’re going to demolish. If there isn’t any wiring or plumbing there, feel free to swing your hammer as much as you want. However, if you find wiring or pipes, you need to proceed with caution. Keep in mind, you don’t only need to look behind the drywall if you’re tearing down a wall. You need to look behind the wall if you’re tearing out cabinets in case some of the drywall gets damaged or removed in the process, as well as look under any flooring or above a ceiling that you’re demolishing. Getting Rid of Debris The demolition portion of a project creates a lot of debris. Unfortunately, in order to proceed to the next phase of the project, you need to dispose of the debris. So, you should consider contacting a dumpster rental service to rent a dumpster. This way, you have a place to put all of the debris that you create, and the dumpster rental company will dispose of it for you when they pick up the dumpster. Keep in mind, you’re less likely to step on a nail or broken glass if you take the material out to the dumpster as you work. So, make it a habit to take out some trash every time you walk outside or take a break. If you complete the demolition for your home project by yourself, you can save a good amount of money. Unfortunately, even...

read more

Possible Air Compressor Problems In Your Refrigerator

Posted by on 6:37 pm in Uncategorized | Comments Off on Possible Air Compressor Problems In Your Refrigerator

Does your refrigerator have occasional moments in which it stops keeping food cold? You may have a problem with your air compressor. It may be time for you to get in touch with an air compressor professional website if you need a replacement or repair. Below, discover a few things that might happen to a refrigerator when the air compressor is in need of a professional inspection. The Refrigerator Suddenly Stops Making Any Noises If you suddenly notice that the refrigerator is not making any kind of noise (you should hear small hum), it is a sign that the fan inside of the air compressor is not working. You don’t want to keep a refrigerator plugged in when the air compressor does not have a functional fan inside of it. The reason is because the fan is used to prevent the air compressor from overheating. An air compressor technician can install a new fan if this is the root of the problem your refrigerator is having.  The Electricity to the Refrigerator Shuts Off a Lot When there is a consistent problem with the electricity shutting off, it requires prompt attention. Unless there is something directly wrong with the circuit breakers, they are shutting off the flow of electricity to your refrigerator because there is a fire hazard. The risk for a fire likely stems from the air compressor in the refrigerator overheating. You may want to hire an electrician to remove the outlet cover and see if the overheating air compressor has caused damaged to the wires in the wall. You can also use a multi-meter to see if too much power is going through the outlets and causing the fridge to turn off. You should also keep the refrigerator unplugged until the air compressor has been repaired. There is an Odor of Burning Near the Refrigerator When a refrigerator starts smelling like something is burning, it is a sign that the air compressor is getting hotter than usual. The air compressor may be hot because it is struggling to keep cold air on the inside of the refrigerator and is unable to keep it at the right temperature. The odor is from the motor of the air compressor working overtime when it is not designed to do so. Basically, an air compressor is designed to automatically come on and off throughout the day to regulate the temperature in the refrigerator (as you open and shut the fridge). Get in touch with an air compressor technician as soon as you are able...

read more